Sealer for interior wall and floor surfaces
Stopdust is a water-based acrylic-polymer emulsion that is used to seal cementitious wall and floor surfaces.
Stopdust is applied by roller, brush or squeegee in one or more coats and dries to a clear, dust-free and hygienic finish. It has good durability to pedestrian and vehicular traffic.
- Good penetration
- Can be applied to freshly hardened concrete
Approximately 10m² per kg per coat.
This figure is based on application to a smooth dense surface. Coverage will vary according to the texture, porosity and evenness of the surface to which Stopdust is being applied. It is recommended that a test application be carried out to determine the precise coverage rate for each job. For particularly porous surfaces add 1 part of clean cold water to 4 parts of Stopdust and shake well before use.
Pack size: 25kg